1.YS-DI-(10-20)AL/H series medical ultra-pure water treatment system utilizes single-stage RO system.
2.The equipment of this model is equipped with a built-in water tank.
3.The water quality produced by the equipment of this model complies with the first-class standard of Chinese laboratory GB/T 6682-2008.The equipment is measured by resistivity meter, with the resistance value reaching 15-18M0.cm@259C
4.The ion removal rate of the whole equipment equals to 99.6%
| EQUIPMENT PARAMETERS AND RELEVANT REQUIREMENTS | |||
| Equipment model | YS-DI-(10-20)AL/H | Water quality standards | GB/T 6682-2008 |
| Water output | 10L-20L/H | ||
| Quality of water production | |||
| Electrical resistivity(25°C),MΩ*cm | ≥15-18MQ·cm | ||
| Electrical conductivity (25’C), mS/m | 0.005 | ||
| Absorbency(254nm,1cm optical distance) | 0 | ||
| Soluble silicon content (as Si02), mg/L | <0.01 | ||
| Oxidizable substance content (in O), mg/L | <0.08 | ||
| Evaporation residue content 105’C+2’c, mg/L | 0.6 | ||
| Membrane desalination rate | 99.60% | ||
| Additional information | |||
| Equipment size | 26*43*43cm | ||
| Influent requirements Water pressure Water temperature Power supply | |||
| Incoming water pressure | ≥20.2MPa | ||
| Water temperature | 5-45°C | ||
| Power supply | AC220V+10% 50HZ,with 24V safety voltage | ||
| Power supply | (0.1-0.15)kw | ||
| Scope of application | |||
| Atomic absorption/fluorescence/laboratory/clinical lab; Fully automatic biochemical/luminescent immune equipment water supply, High-precision electrochemical configuration water/battery cells/storage battery/chip water; Water supply for constant quantitative analysis/medicine, etc. | |||
Related Products
التركيز على معدات الاختبار الصناعية، وخطوط الإنتاج الآلية، والمصانع الذكية الرقمية، والبيانات الضخمة للإنترنت الصناعي وغيرها من مجالات النظام. تطبيقات المنتجات المختلفة والصناعات المختلفة
