Product Categories:Clinical laboratory ultra-pure water equipment

40l Clinical Testing Ultrapure Water Purifier Equipment

YS-D1-40AL/H series medical ultra-pure watertreatment system utilizes single-stage ROsystem.
The equipment of this model is equipped with abuilt-in water tank.
The water quality produced by the equipment ofthis model complies with the first-class standardof Chinese laboratory GB/T 6682-2008. Theequipment is measured by resistivity meter, withthe resistance value reaching 15-18MΩ.cm@25°C
The ion removal rate of the whole equipmentequals to 99.6%

Inquire Now

EQUIPMENT PARAMETERS AND RELEVANT REQUIREMENTS
Equipment model	YS-DI-40AL/H Water quality standards	GB/T 6682-2008
Water output	≥40L/H
Quality of water production
Electrical resistivity (25°C), MQ· cm	≥15-18MQ·cm
Electrical conductivity (25℃), mS/m		0.005
Absorbency (254nm, 1cm optical distance)		0
Soluble silicon content (as Si2), mg/L		<0.01
Oxidizable substance content (in O), mg/L		<0.08
Evaporation residue content 105°℃C±2℃, mg/L		0.6
Membrane desalination rate	99.9%。
Adlitional information
Equipment size	4050108cm
Influent requirements Water presre Watertemperature Power spply
Incoming water pressure	≥0.2MPa
Water temperature		s150ppm
Power supply		AC220V ± 10% 50HZ, wth 24V safety voltage
Rated power		0.2kw
Scope of application
Atomic absorption/fluorescence/laboratory/clinical la; Fully automatic biochemicalluminescent immune equipment water supply; High-precision electrochemical configuration water/battery cells/storage battery/chip water; Watr uply fonstant quantitatie analysis/medin, .