YS-D1-(100-120)AL/H series medical ultra-purewater treatment system adopts single-stageRO system.
The equipment of this model is equipped with abuilt-in water tank.
The water quality produced by the equipment ofthis model complies with the first-class standardof Chinese laboratory GB/T 6682-2008. Theequipment is measured by resistivity meter, withthe resistance value reaching 15-18MQ.cm@25℃
The ion removal rate of the whole equipmentequals to 99.6%
| EQUIPMENT PARAMETERS AND RELEVANT REQUIREMENTS | |||
| Equipment model | YS-DI-150AL/H | Water quality standards | GB/T 6682-2008 |
| Wasserleistung | ≥150 l/h | ||
| Quality of water production | |||
| Electrical resistivity (25 ° C), MQ · cm | ≥15-18MQ· cm | ||
| Electrical conductivity (25℃), mS/m | 0.005 | ||
| Absorbency (254nm,1cm optical distance) | 0 | ||
| Soluble silicon content (as SiO2), mg/L | <0.01 | ||
| Oxidizable substance content (in O), mg/L | <0.08 | ||
| Evaporation residue content 105℃±2℃, mg/L | 0.6 | ||
| Membrane desalination rate | 99.99%。 | ||
| Additional information | |||
| Equipment size | 54*56*148cm | ||
| Influent requirements Water pressure Water temperature Power supply | |||
| Incoming water pressure | ≥0.2MPa | ||
| Water temperature | ≤150ppm | ||
| Power supply | AC220V±10% 50HZ, with 24V safetyvoltage | ||
| Rated power | 0.7kw | ||
| Scope of application | |||
| Atomic absorption/fluorescence/laboratory/clinical lab; Fullyautomatic bochemicalluminescent immune equipment water supply;High-precision electrochemical configuration water/battery cells/storage battery/chip water; Water supply for constant quantitative analysis/medicine, etc. | |||
Verwandte Produkte
Schwerpunkte liegen auf industriellen Prüfgeräten, automatisierten Produktionslinien, digitalen intelligenten Fabriken, Big Data im industriellen Internet und anderen Systemfeldern. Verschiedene Produktanwendungen und verschiedene Branchen
