Product Categories:Equipos de agua ultrapura para laboratorio clínico

Sistema de tratamiento de agua desionizada y agua ultrapura de 60 l para pruebas clínicas

YS-D1-60AL/H series medical ultra-pure watertreatment system utilizes single-stage ROsystem.
The equipment of this model is equipped with abuilt-in water tank.
The water quality produced by the equipment ofthis model complies with the first-class standardof Chinese laboratory GB/T 6682-2008. Theequipment is measured by resistivity meter, withthe resistance value reaching 15-18M0.cm@25°C
The ion removal rate of the whole equipmentequals to 99.6%

Inquire Now

EQUIPMENT PARAMETERS AND RELEVANT REQUIREMENTS
Equipment model	YS-DI-60AL/H	Water qualitystandards	GB/T 6682-2008
Water output		≥60L/H
Quality of water production
Electrical resistivity (25 ° C), MQ· cm		≥15-18MQ·cm
Electrical conductivity (25℃), mS/m		0.005
Absorbency (254nm, 1cm optical distance)		0
Soluble silicon conten (as SiO2), mg/L		<0.01
Oxidizable substance content (in O), mg/L		<0.08
Evaporation residue content 105℃C±2℃, mg/L		0.6
Membrane desalination rate		99.99%
Additional information
Equipment size		4150131cm
Influent requirements Water pressure Water temperature Power supply
Incoming water pressure		≥0.2MPa
Water temperature		s150pm
Power supply		AC220V ± 10% 50HZ, with 24V safety voltage
Rated power		0.25kw
		Scope of application
Atomic absorption/fluorescence/laboratory/clicallab; Fullyautomatic biochemicalluminescent immune equipment water supply; High-precision electrochemical configuration water/battery cells/storage battery/chip water; Water supply for constant quantitative analysis/medicine, etc.

tags:

laboratory deionized water system medical ultra-pure water treatment system ultra pure water filtration system Ultrapure water treatment laboratory